Classic Jalopy Blog

DS Carpet Replacement 0

DS Carpet Replacement

When I got it, the DS had threadbare blue carpets.   The previous owner also had a blue DS, so I suspect at some point he upgraded the carpets in that car and the blue ones were in better condition than the carpets in the red car.    In addition it had marine carpet on the box sills which for a DS Comfort should...

CCCNSW Tech Day Oct 2014 1

CCCNSW Tech Day Oct 2014

Today was one of the regular tech days organised by the Citroen Club.   I always enjoy the tech days, even if I am not doing much to my car – you can see the other cars, talk to the other members and sometimes learn how to do things by watching what other people do. One of the tricks I learned today was simple...

Changing the DS Accumulator Sphere 3

Changing the DS Accumulator Sphere

Previously, I had removed all my suspension spheres to check their pressure.   Their pressure was checked at the Citroen Club tech day, and found to be acceptable.     Given I had the system de-pressurized, I also wanted to change the DS accumulator sphere.     The accumulator acts as a store of system pressure.   This means that the pump does not...

Citroen DS Sphere removal 3

Citroen DS Sphere removal

Central to the Citroen DS hydraulic system is a set of ‘spheres’ that hold hydraulic pressure.  The spheres have an internal diaphragm so they can contain gas on one side and hydraulic fluid on the other.    One is used for each wheel to provide the suspension, as the gas forms the ‘spring’ and the amount of fluid in the sphere controls the ride...

280CE major service continued 0

280CE major service continued

The 280CE came over to the garage to continue the items on the major service, namely: New Spark plugs Transmission fluid and filter Rear end fluid change Brake fluid flush We used NGK spark plugs as they offer non-resistor plugs that are easy to find.   The original spec for these cars called for non-resistor spark plugs, which are much harder to find now....

Citroen DS interior rear roof trim – attempt 4 0

Citroen DS interior rear roof trim – attempt 4

I have tried a few times to get the rear trim that sits between the C pillars to not fall down on to the parcel shelf. My first attempt was to use the correct clips, however the trim would fall down over bumps.      My second attempt, was a 3M product, which is sort of like Velcro and sold in little squares at...

Retrosound Model 1 re-installed 1

Retrosound Model 1 re-installed

after checking all the connections, the Retrosound Model 1 is now back in the E-Type and I also replaced the cigarette lighter while I was at it.    The cigarette lighter had rusted internally and was no longer working – and on longer drives the battery in the GPS was not cutting it.   Replacing the cigarette lighter was fairly easy, although the replacement...

2014 NSW Mercedes Benz Club Concours 3

2014 NSW Mercedes Benz Club Concours

I attended the Mercedes Club Concours this year.  It was a lovely day, 18c  and a great turn out of cars. Also got to talk to some interesting people and hear about their cars.  Unlike the last time I went in 2012, the older cars are starting to come back, they seemed to stay away for a few years, for one reason or another....

Troubleshooting the Retrosound Model One 0

Troubleshooting the Retrosound Model One

The Retrosound Model One I have in my Jaguar had stopped working – symptoms were that the display was lit up in every possible place (i.e. like a digital watch showing 88:88).   This had happened before, and the cause turned out to be one of the 12v lines was not connected.   The Model 1 uses two 12v and a ground – one...

DS Oil Service 0

DS Oil Service

It was time again for another service for the DS.   Last time, the gear oil in the transmission was quite dirty so even though it didn’t need to be done again, I thought it would make sense to change the oil in there too.   I also had a tip from the forum that using Castrol VMX with the Nulon gearbox additive makes...

E-Type brake overhaul 1

E-Type brake overhaul

The brakes on the E-Type have been somewhat problematic since I got it.    When the brakes got hot, they would not always release fully.     Over the last 4 years I have tried a number of things to fix the problem but it has always come back to some extent. When I still had the car in the USA, it was worse,...

280CE coolant flush and M110 thermostat change 1

280CE coolant flush and M110 thermostat change

The 280CE had been performing well on the road after being put back into service, but the most obvious issue was that it never got up to operating temperature.   Running too cool is not good for the engine and also results in higher fuel consumption.   As they say, overheating an engine might kill it instantly, but underheating it will kill it slowly....

DS door contact switch and shift gate 1

DS door contact switch and shift gate

The DS door contact switch that controls the interior lights based on the doors being open or shut had disintegrated, which meant that the interior lights were always on.   Not the most helpful feature if you want to be able to restart the car after leaving it parked.  The actual switches are easy to remove and install, but the problem is that since...

SLC Steering wheel options 1

SLC Steering wheel options

Mercedes SLC models (280, 350, 380, 450, 450 5.0, 500) had three different steering wheels in their lifetime.   All three steering wheels were large (around 19″) and made from plastic.   This was a big departure from the elegant wheels of the 60’s and the nicer leather covered wheels from the mid 80s and 90s. These wheels also do not fare well in the...

250SE W111 Production Figures – Update 0

250SE W111 Production Figures – Update

In a previous post, I was looking at the changeover of production of the 220SEb Coupe/Cabriolet to the 250SE Coupe/Cabriolet.   Mercedes used the same number series for the 220SE Sedan, 220SE Coupe, Cabriolet and the 250SE Coupe and Cabriolet. According to a Mercedes Factory Manual I have, the last 220SEb was #82991 (and the first 250SE #82992).     At the start of...

Final DS door card installed 1

Final DS door card installed

The fourth and final door card for the DS is now installed.   The reason for the long delay was that the rear drivers side door would not lock.  If the door was unlocked, the mechanism would not hold the door closed, if locked, it would behave as if it were unlocked. Therefore, before I fitted the door card, I wanted to fix the...

Classic Jalopy